|
11 In
Novell's use of RIP, there are two metrics used to make routing
decisions. Select the two metrics.
A. Ticks.
B. Hops
C. Loops
D. Counts
Ans:A
&B
It first
uses ticks (which is about 1/18 sec.); if there is a tie, it
uses hops; if hops are equal, then it uses an administratively
assigned tiebreaker.
12 What is
the Cisco name for the encapsulation type used on a serial
interface?
A. HDLC
B. SDLC
C. SAP
D. SNAP
Ans A
13 "arpa" is
used by the Cisco IOS for which encapsulation types?
A.
Ethernet_II
B.
Ethernet_802.3
C.
Ethernet_802.2
D.
Ethernet_SNAP
Ans A
Novell's IPX
and Cisco's IOS name their protocols differently. Cisco uses sap
for Ethernet_802.2, Token-Ring, and Novell's FDDI_802.2. Cisco
uses snap for Ethernet_SNAP, Token-Ring_SNAP, and FDDI_SNAP.
Cisco uses arpa for Ethernet_II and, finally the default is
Novell-ether for Novell's Ethernet_802.3.
14 "snap" is
used by the Cisco IOS for which encapsulation types?
A. Ethernet_SNAP
B. Token-Ring_SNAP
C. FDDI_SNAP
D. Novell-SNAP
E. Novell-FDDI.
Ans:
A,B &C Novell's IPX and Cisco's IOS name their protocols
differently. Cisco uses sap for Ethernet_802.2, Token-Ring, and
Novell's FDDI_802.2. Cisco uses snap for Ethernet_SNAP, Token-Ring_SNAP,
and FDDI_SNAP. Cisco uses arpa for Ethernet_II and, finally the
default is Novell-ether for Novell's Ethernet_802.3.
15"sap" is
used by the Cisco IOS for which encapsulation types?
A. Ethernet_802.2
B. Token-Ring
C. FDDI_SNAP
D. Ethernet_802.3
E.
FDDI_802.2
Ans
A,B &E
Novell's IPX
and Cisco's IOS name their protocols differently. Cisco uses sap
for Ethernet_802.2, Token-Ring, and Novell's FDDI_802.2. Cisco
uses snap for Ethernet_SNAP, Token-Ring_SNAP, and FDDI_SNAP.
Cisco uses arpa for Ethernet_II and, finally the default is
Novell-ether for Novell's Ethernet_802.3.
16 Which
type of Ethernet framing is used for TCP/IP and AppleTalk?
A. Ethernet
802.3
B. Ethernet
802.2
C. Ethernet
II
D. Ethernet
SNAP
Ans D
Ethernet
802.3 is used with NetWare versions 2 through 3.11, Ethernet
802.2 is used with NetWare 3.12 and later plus OSI routing,
Ethernet II is used with TCP/IP and DECnet, and Ethernet SNAP is
used with TCP/IP and AppleTalk.
17 Which
type of Ethernet framing is used for TCP/IP and DECnet?
A. Ethernet
802.3
B. Ethernet
802.2
C. Ethernet
II
D. Ethernet
SNAP
Ans:
C
Ethernet
802.3 is used with NetWare versions 2 through 3.11, Ethernet
802.2 is used with NetWare 3.12 and later plus OSI routing,
Ethernet II is used with TCP/IP and DECnet, and Ethernet SNAP is
used with TCP/IP and AppleTalk.
18 You are a
system administrator on a NetWare network, you are running
NetWare 4.11 and you cannot communicate with your router. What
is the likely problem?
A. NetWare
4.11 defaults to 802.2 encapsulation.
B. NetWare
4.11 defaults to 802.3 encapsulation
C. Cisco
routers only work with NetWare 3.11.
D. NetWare
3.11 defaults to 802.2 encapsulation.
Ans A
The default
encapsulation on Cisco routers is Novell Ethernet_802.3 and
NetWare 3.12 and later defaults to 802.2 encapsulation, 3.11 and
earlier defaults to 802.3.
19 NetWare
IPX addressing uses a network number and a node number. Which
statements are true?
A. The
network address is administratively assigned and can be up to 16
hexadecimal digits long.
B. The node
address is always administratively assigned.
C. The node
address is usually the MAC address.
D. If the
MAC address is used as the node address, then IPX eliminates the
use of ARP.
Ans
A, C &D
The network
address can be up to 16 hexadecimal digits in length. The node
number is 12 hexadecimal digits. The node address is usually the
MAC address. An example IPX address is 4a1d.0000.0c56.de33. The
network part is 4a1d. The node part is 0000.0c56.de33. The
network number is assigned by the system administrator of the
Novell network.
20 Which
NetWare protocol works on layer 3--network layer—of the OSI
model?
A. IPX
B. NCP
C. SPX
D. NetBIOS
Ans A
IPX (Internetwork
Packet Exchange) is a NetWare network layer 3 protocol used for
transferring information on LANs. |
